Showing posts with label Nail and Saw Projects. Show all posts
Showing posts with label Nail and Saw Projects. Show all posts

DIY Granite Mini Slabs + Undermount Sink

Friday, April 23, 2010

My dream was to have Granite Slab in my kitchen. But after receiving a couple quotes of $4,000 for my kitchen, I quickly decided to go another route. I didn't have to have granite, I was open to other countertop solutions. But I quickly realized that, yet again, doing it ourselves would give us the biggest bang for our buck (not to mention thousands of dollars saved in our pockets).

I was introduced to "Mini Slabs" by my husband's Aunt and Uncle. They have a store called Interiors Plus Flooring and I was sold the minute I saw the granite. They are 18x26 inch tiles and range from $50-$55/tile. Average $15/sq ft! A STEAL!
** Mini slabs, at the moment, come in limited style choices. But in the end they had what I was looking for and it was worth it to me!
Credit: Oregon Tile and Marble
The "Mini Slabs" are made to cover your average length countertop, with 1 inch extra to cut and bring to the front edge to finish. Grout lines are minimal which gives it more of an appearance of slab. You can't beat that!

Because we saved so much money going with the min slabs, we decided to have Crowley's Tile Edging bullnose all the edges to give it that finished, slab look, and fulfill my dream of having an undermount sink!
TIP: My husband has never in his life installed granite before. He watched hundreds of Youtube videos (just look up "installing granite countertops" or anything along those lines). It does help to be handy and you must be very precise and accurate in your measuring. I am just glad I didn't have to do it, it looked HARD!
Installing the Undermount Sink:

This is how we picked up the tiles, before my husband cut them
Crowley's made the cut-out for the sink and this is how we picked it up (above). It was up to us to cut the tiles and install.
After my husband cut the tiles. It is now looking more like a sink!

Cut the plywood and drop the sink in. We are almost there!
You can't forget to cut the holes for the sink and soap.
Install the plumbing. My husbands LEAST favorite job.
After installing the granite top it's held down by these bad boys.
I can't forget to mention we put weights on top of the countertops to hold the granite down and make it level.


TIP: We put the tiles right on top of 1 layer of Plywood. We opted against the Hardiboard (after it was installed, then we had to tear it off) because the plywood + hardiboard would have been too thick and the 1 inch edge of granite would not have covered it. We also found if we did hardiboard that our stove would not raise high enough and it wouldn't have fit!

See the weights on the left? Gotta keep the countertop level somehow!
Tip: Use Silicone for installing the granite edge.
VIOLA!! The finished product (please ignore our unfinished backsplash):

Here is a shot of the corners with the bullnosed edge. Definantly the way to go!
This is 2 mini slabs next to the stove. Look at the bullnose again, so pretty
Grout lines are minimal and hide VERY well. I don't even notice them.
This is our island. I bet you can't even tell me how many tiles are on here. (4 tiles)


Project Facts:
  • Granite (including Bullnose edge and Undermount Sink)- $1600
  • Labor- FREE
  • Granite: Gialla Santa Cecilia
  • Grout: Non-sanded "Light Smoke"
Total Cost of Granite Countertops: $1600

Linking to:
DIY Day @ ASPTL
The Girl Creative

The Kitchen Island Reveal

Sunday, April 18, 2010


Click HERE for a full tutorial on how to turn your basic kitchen island into a stunning custom-looking island.
After almost a month of hard work- sanding, constructing, painting, Graniting (is that a word?)- the island is FINISHED!!!
Lets blast into the past and take a look at what it WAS:

Now lets step back into the present (thank goodness) and look at the gorgeous beauty I have in my kitchen now:)

I changed out the pulls for some sleek sexy ones (Lowes)
We also changed out the island supports for nice pretty ones. I think these add so much.
Oh, I can't forget the AMAZING fruit bowl I picked up at Home Goods! LOVE IT!!!
Because I just LOVE before and afters, lets see a side-by-side for kicks:

All of this for around $100 (not counting the granite)! you certainly can't beat that!

Oh, and our whole kitchen is SOooo CLOSE to being done, except I changed my decision on the Backsplash (I know I am SO indecisive). I am going a completely opposite direction and I am SO excited how it will pull together my style and give our kitchen a more modern edgy look! I can't wait to show you all!!!! YipEE!!!

Linking this to:
The DIY Showoff
Between Naps on the Porch
The Girl Creative
Making

Customizing Your Not-So-Custom Kitchen Island

Tuesday, March 23, 2010

I bet hundreds of you are sporting this same kitchen island in your home. If not this exact one, then one almost like it. You like having an island, but you dream of having one of those pretty islands that can stand on its own and pass for a piece of furniture.

Originally I was hooked on the beadboard island like Thrifty Decor Chick's. It is just so perfect in Sarah's kitchen. She pulls it off so well. But the more I thought about it, I am just not a beadboard kitchen type girl. Don't get me wrong, I LOVE beadboard in the bathroom. But beadboard in the kitchen, in my kitchen, just didn't seem right.

So I came up with "my own" design! Ok, so maybe you have seen this before. I took all these different variations from classic kitchens and designed my own little kitchen island that could pass as a custom piece of art for a simple price.

From this little sketch on a scrap piece of paper (Yes, I drew that, not my 3 year old daughter... ) my husband actually understood my design idea and gathered all the materials needed. Again, I love my husband. (However, can I say that while he was making cuts he said "your little island design is a lot harder than beadboard!".... whoops!)

You will need:
  • Base of your choice. I chose 5 1/2" base. Big and chunky, just how I like it!
  • 1x4 Material


1. Build out the base. My husband ended up doing 2-3 layers so the baseboard would be set further out than the other moldings.

2. Nail your base on. I chose really thick 5" moldings. I wanted a craftsman look. I love the chunky molding look. In the picture above you can see how building the island base out doesn't need to be perfect or pretty.

This picture is on the cabinet door side of the island on the bottom corner.
We needed to fill that gap with base.

3. Construct your corners. We found that we needed to corner the base a little before the front of the island (where the cabinets are) to keep it sturdy and for extra support. Remember, I have twin boys in the home, one kick on that flimsy edge would destroy it!

4. Start adding your 1x4s.

5. We screwed in these decorative supports before adding the pieces at the top.

Top Corner so you can see how the pieces come together.

Bottom corner

Isn't she already a beauty?

We can't forget the finish prep work before painting!
Spackle

Sand
Yup, my job is always to prep it and paint it.... make it look pretty :)

Prime

and wait ....
for another opportunity to finish it when I can get the kids outa the house......

Fireplace: The Reveal

Wednesday, November 25, 2009

I can proudly say, the day before Thanksgiving our fireplace is DONE! It is getting harder to work around my active, needy kids, but if I can do it, anyone can.

Before we moved in:

Before the Mantel, with my "wanna-be-a-real-fireplace-mantel" paint remedy:


During remodeling:

and.... drum roll Please...... dum dum da da!!!

AFTER
a coat of primer and 3 coats of paint later,

because I am a sucker for Before and Afters.....


We haven't put the TV back yet, part of me doesn't even want to. I am not a fan of Tv's on top of mantels (it is like worshipping the tv... nerdy!), but that is where it is all wired so it will eventually be there again. I have to say the mantel completely changes our whole family and kitchen area. It is just STUNNING! (confession: I have been sitting, staring at it for the past couple days with a big FAT smile on my face).

Costs:

$70- router & Bit

$55- MDF

$100- Slate & Supplies

$30- Pine

$40- Base & Crown molding

$33- molding & accents

$52- Paint

$20- misc (Spackle, caulk etc)

$400 total.


Pretty good compared to the $2,000-4,000 estimate we got before :)


Linking to: